Amazing Plate Hanger
The Original 'Invisible' Disc Plate Hanger
Tested and proven for more than 30 years
Mounting Instructions
EASY TO USE:
-
Clean the plate, (even if the plate is new, as surface contamination may inhibit adhesion). With metals, any oxide formation should be removed first with a proprietary cleaner and then cleaned with neat detergent and rinsed in clean water.
-
Wet the adhesive side of the disc and slowly rub with your finger to activate the glue.
-
When the glue becomes sticky and tacky, apply the disc to the back of the plate (make sure the hook is in the correct position for the plate design). Press down firmly.
-
Leave plate out to dry overnight before thoroughly testing strength of adhesion.
-
Finally hang your plate on the wall and admire.
Contact Amazing Plate Hanger:
704-649-7202
jreithmiller@gmail.com
ADDITIONAL COMMENTS::
-
For heavier or odd shaped items, two invisible disc hangers can be used with strong cord or wire strung between them.
-
Some manufacturers paint the back of plates on top of glazed or fired surfaces. It is recommended that the paint be removed locally to insure a proper bond between the invisible disc hanger and the plate.
-
The invisible disc hanger removes completely in warm water and will not mark the plate. Do not reuse as the adhesive has been compromised by removal from plate.
